Languages homework help
Languages homework help. Write a 2 pages paper on capacitors using charge sensors. Capacitors Using Charge SensorsAbstractThe major objective of this lab was to determine the capacitance of different conductor-dielectric geometries by use of charge-sharing technique. In addition, the lab also involves calculating the amount of voltage cumulated as the result of charge sharing process. From this process, an unknown capacitance is also figured out. Objective The purpose of the lab is to determine the capacitance of variety of conductor-dielectric by making use of charge sharing methodology. This would provide benchmark for exploring the principle of conservation of charge in a system. The application of various capacitors with different capacitance also makes it important to determine unknown capacitance besides voltage calculation by using the equation (Q=CV)ProcedureSix different capacitors were obtained from the lab and their capacitance measured. A parallel circuit was created composing of 1.0?F capacitor and 0.1?F capacitor (making 1.1?F. A second capacitor of 1.0?F was charged into 5V. The charged capacitor was then touched to the 1.1?F capacitor (uncharged) in the circuit. The 1.1?F was again discharged. The aforementioned steps were then repeated with a 0.1?F capacitor used in place of 1.0?F as the charge transfer capacitor. Then, instead of discharging the 1.1?F capacitor the 0.1?F capacitor was recharged to 5.0V followed by reconnecting it. The 1.1?F capacitor was then charged to 5.0V followed by sharing its charge with uncharged capacitor that has unknown capacitance. The final reading was made from the voltmeter and then used to arrive at the unknown capacitance by use of the equation Q=CV. The unknown capacitance was then directly measured from the digital voltmeter. A parallel-plate capacitor was constructed through inserting a waxed paper in between aluminium plates. The construct was then pressed together by placing on top a 1.0kg weight. A charge sensor was then mounted with a 0.01?F capacitor. The combined capacitance of 0.01?F capacitor, together with the charge sensor, was then measured by using the digital voltmeters capacitance capability. This formed the standard capacitor for the lab. The standard capacitor was charged to 5.0 V using the power supply. Charge-sharing method was then used to determine unknown capacitances, that is capacitances of a length of coaxial cable and a parallel-plate capacitor. Experimental data The digital voltmeter was used to measure the voltage for 1.0?F, 0.1?F and 0.01?F. The unknown capacitor value was measured 0.48?F. The sensor capacitance was measured to be 19.65?F and the aluminum 9.6?F. The following is a table showing the results:capacitorcapacitanceInitial voltagetouching2501.0?F 5.000V0.415 V100/105 k0.1?F 5.000V2.412 V103 g0.01?F 5.000V0.045 VBlack0.48?F 5.000V1.538 VCalculating unknown capacitance(.02 + )(.02 + ) = 0.02 X 10-6From the law of conservation of charge 1 ?F share to 1.1 ?F:0.1 ?F share to 1.1 ?F:First time:Second time:Third time:Theoretical valueActual valueDiscrepancyFirst time0.415V0.48%Second time0.833V0.801V3.84%Third time1.118V1.152V2.5%Unknown capacitance capacitor:Aluminum plates:Coaxial cable: = 1.92 x 10-9FDiscussionThe lab made use of charge-sharing technique in combination with equation used in determining capacitance of a variety of capacitors. DVM (digital voltmeter) was used to measure voltage and to determine the actual capacitance. From charge sharing, 1?F to 1.1 ?F, the difference between the actual and the measured was 1.34% while that for 0.1?F to 1.1?F was 0.38%, 3.85% and 0.5%. Further, we were able to calculate the unknown capacitance value as 0.3?F while the measured value was 0.48, which gave a percentage difference of 60.3%. This was the biggest gap difference and could be contributed to experimental errors. The error could have arose from not discharging well the sensor once it was used. Some errors could have also arose from rounding off to significant figures. When looking at the results, we confirm that Q start is always equal to Q end. In which case Qstart =Cstart*Vstart = Cend*Vend. From the equation, we isolate the unknown, which is Cend and solved it. Consequently, this confirms the applicability of principles of conservation of charge. Conclusion In conclusion, the experiment was successful in meeting the stated objectives with most errors being less than 5% between the actual and the measured values. The only exception is for the unknown capacitance capacitor which gave a bigger percentage difference as the result of experimental errors. By applying charge sharing methodology, we were able to determine the he capacitance of different conductor-dielectric geometries.
